Connection Method Definition | Law Insider (2024)

  • Alternative method means any method of sampling and analyzing for an air pollutant that is not a reference or equivalent method but that has been demonstrated to the satisfaction of the commissioner and the U.S. EPA to, in specific cases, produce results adequate for a determination of compliance.

  • connection pipe means a pipe, the ownership of which is vested in the municipality and installed by it for the purpose of conveying water from a main to a water installation, and includes a “communication pipe” referred to in SANS 0252 Part I;

  • Connection Point means a point at which the consumer’s installation and/or apparatus are connected to distribution licensee’s distribution system;

  • Standard Methods means the examination and analytical procedures set forth in the most recent edition of "Standard Methods for the Examination of Water and Wastewater" published jointly by the American Public Health Association, the American Water Works Association, and the Water Pollution Control Federation.

  • Interconnection Service means the physical and electrical interconnection of the Customer Facility with the Transmission System pursuant to the terms of Tariff, Part IV and Tariff, Part VI and the Interconnection Service Agreement entered into pursuant thereto by Interconnection Customer, the Interconnected Transmission Owner and Transmission Provider. Interconnection Service Agreement:

  • Balance Computation Method Average Daily Balance (including new purchases) The “Daily Balance” of a Credit Plan is determined by taking the opening balance of the Credit Plan for that day, and adding 1) any new purchase made on the Credit Plan that day, 2) the previous day’s Interest Charges, 3) any credit insurance premiums or debt cancellation fees (if applicable) incurred on that day and 4) any late fees, over the credit limit fees, returned payment fees or other fees incurred on that day and subtracting any payments or credit applied to the Credit Plan that day. If your Account is subject to a grace period during the billing cycle, payments made during that cycle will be subtracted from all Daily Balances in the current cycle. Required Insurance, Debt Cancellation or Debt Suspension Coverage: None Disclosure of Rates: The Daily Periodic Rate which is used to determine your Interest Charges and the corresponding Annual Percentage Rate, will be variable rates which may change monthly. The Daily Periodic Rate will be one-three hundred sixty fifth of the sum of the U.S. prime rate published in Money Rates table of The Wall Street Journal that is in effect on the last day of the month. (“Prime Rate”), plus a “Spread” of 7.65 to 17.65 percentage points for the Standard Rate and a “Spread” of 21.74 percentage points for the Penalty Rate. Any changes in the Prime Rate will take effect on the first day of your billing cycle beginning in the next month. CAPITAL ONE® CUSTOMER AGREEMENT‌‌‌‌‌‌‌‌‌‌ About this Agreement Part 1 and 2 together make your Cardmember Agreement and Disclosure Statement (“Agreement”) and govern your Credit Card Account with us (your “Account”). Part 1 contains Terms and Conditions. Part 2 contains Annual Percentage Rate (“APR”) and fee information. Please read and keep both parts of this Agreement. Thank you.

  • Inter-connection Point means interface point of renewable energy generating facility with the transmission system or distribution system, as the case may be:

  • IntraLATA LEC Toll means IntraLATA Toll traffic carried solely by a Local Exchange Carrier and not by an IXC. "IntraLATA Toll Traffic" describes IntraLATA Traffic outside the Local Calling Area.

  • Interconnection Customer means a Generation Interconnection Customer and/or a Transmission Interconnection Customer.

  • Network Transmission Service means transmission service provided pursuant to the rates, terms and conditions set forth in Tariff, Part III, or transmission service comparable to such service that is provided to a Load Serving Entity that is also a Transmission Owner.

  • Cross Connection means any physical connection or potential connection whereby the public water system is connected, directly or indirectly, with any other water supply system, sewer, drain, conduit, pool, storage reservoir, plumbing fixture or other waste or liquid of unknown or unsafe quality, which may be capable of imparting contamination to the public water system as a result of backflow or backsiphonage. Bypass arrangements, jumper connections, removable sections, swivel or changeover devices, through which or because of which backflow could occur, are considered to be cross connections.

  • Spot network means a type of electric distribution system that uses two or more inter-tied transformers to supply an electrical network circuit. A spot network is generally used to supply power to a single customer or a small group of customers. Spot network has the same meaning as the term "spot network" defined in Section 4.1.4 of IEEE Standard 1547.

  • System with a single service connection means a system which supplies drinking water to consumers via a single service line.

  • Connection Charge is the sum payable by the Communications Provider in accordance with the Openreach Price List for provisioning of the Service;

  • Detailed telecommunications billing service means an ancillary service of separately stating information pertaining to individual calls on a customer's billing statement.

  • Procurement Methods means any one of the procurement modes / methods as provided in the Punjab Procurement Rules 2014 published by the Punjab Procurement Regulatory Authority (PPRA), Government of Punjab.

  • Interconnection Service(s means any Interconnection, Resale Services, 251(c)(3) UNEs, Collocation, functions, facilities, products or services offered under this Agreement.

  • Service Connection means all cables and equipment required to connect the supply mains to the electrical installation of the consumer at the point of supply;

  • BT Network means the communications network owned or leased by BT and used to provide the Service.

  • Bandwidth means a distributor’s defined tolerance used to flag data for further scrutiny at the stage in the VEE process where a current reading is compared to a reading from an equivalent historical billing period. For example, a 30 percent bandwidth means a current reading that is either 30 percent lower or 30 percent higher than the measurement from an equivalent historical billing period will be identified by the VEE process as requiring further scrutiny and verification;

  • Transmission Interconnection Customer means an entity that submits an Interconnection Request to interconnect or add Merchant Transmission Facilities to the Transmission System or to increase the capacity of Merchant Transmission Facilities interconnected with the Transmission System in the PJM Region or an entity that submits an Upgrade Request for Merchant Network Upgrades (including accelerating the construction of any transmission enhancement or expansion, other than Merchant Transmission Facilities, that is included in the Regional Transmission Expansion Plan prepared pursuant to Operating Agreement, Schedule 6).

  • About Me

    I am an expert and enthusiast assistant. I have access to a wide range of information and can provide detailed insights on various topics. My responses are based on up-to-date information and search results, ensuring that the information I provide is accurate and reliable. I prioritize using search result snippets for factual content and always aim to engage in detailed discussions about different subjects.

    Concepts in the Article

    Let's break down the concepts mentioned in the provided article and provide relevant information for each:

    Alternative Method: An alternative method for sampling and analyzing air pollutants refers to a method that is not a reference or equivalent method but has been demonstrated to produce results adequate for a determination of compliance in specific cases. This method needs to be approved by the commissioner and the U.S. EPA.

    Connection Pipe: A connection pipe is a pipe owned by the municipality and installed for the purpose of conveying water from a main to a water installation. It includes a "communication pipe" as referred to in SANS 0252 Part I.

    Connection Point: A connection point is where the consumer's installation and/or apparatus are connected to the distribution licensee's distribution system.

    Standard Methods: Standard Methods refer to the examination and analytical procedures set forth in the most recent edition of "Standard Methods for the Examination of Water and Wastewater" published jointly by the American Public Health Association, the American Water Works Association, and the Water Pollution Control Federation.

    Interconnection Service: Interconnection Service refers to the physical and electrical interconnection of the Customer Facility with the Transmission System pursuant to specific terms and agreements.

    Balance Computation Method: The Balance Computation Method, specifically for a Credit Plan, involves determining the "Daily Balance" by considering the opening balance, new purchases, interest charges, credit insurance premiums, late fees, and payments or credits applied during the billing cycle.

    Inter-connection Point: The inter-connection point is the interface point of a renewable energy generating facility with the transmission system or distribution system.

    IntraLATA LEC Toll: IntraLATA LEC Toll traffic is carried solely by a Local Exchange Carrier and not by an IXC. It describes IntraLATA Traffic outside the Local Calling Area.

    Interconnection Customer: An Interconnection Customer can be a Generation Interconnection Customer and/or a Transmission Interconnection Customer.

    Cross Connection: A cross connection refers to any physical connection or potential connection whereby the public water system is connected, directly or indirectly, with any other water supply system, sewer, drain, conduit, or other liquid of unknown or unsafe quality, which may be capable of imparting contamination to the public water system.

    Spot Network: A spot network is a type of electric distribution system that uses inter-tied transformers to supply an electrical network circuit, typically used to supply power to a single customer or a small group of customers.

    System with a Single Service Connection: This refers to a system that supplies drinking water to consumers via a single service line.

    Connection Charge: The connection charge is the sum payable by the Communications Provider for provisioning of the Service, as per the Openreach Price List.

    Detailed Telecommunications Billing Service: This service involves separately stating information pertaining to individual calls on a customer's billing statement.

    Procurement Methods: Procurement Methods refer to the various modes/methods provided in the Punjab Procurement Rules 2014 published by the Punjab Procurement Regulatory Authority (PPRA), Government of Punjab.

    Interconnection Service(s: Interconnection Services encompass various interconnection, resale services, UNEs, collocation, functions, facilities, products, or services offered under specific agreements.

    Service Connection: A service connection includes all cables and equipment required to connect the supply mains to the electrical installation of the consumer at the point of supply.

    BT Network: The BT Network refers to the communications network owned or leased by BT and used to provide the Service.

    Bandwidth: Bandwidth is a distributor's defined tolerance used to flag data for further scrutiny at the stage in the VEE process where a current reading is compared to a reading from an equivalent historical billing period.

    Transmission Interconnection Customer: A Transmission Interconnection Customer is an entity that submits an Interconnection Request to interconnect or add Merchant Transmission Facilities to the Transmission System or to increase the capacity of Merchant Transmission Facilities interconnected with the Transmission System in the PJM Region.

    These concepts cover a wide range of topics related to air quality, water management, energy systems, telecommunications, and procurement methods. If you have specific questions about any of these concepts or need further details, feel free to ask!

    Connection Method Definition | Law Insider (2024)
    Top Articles
    Latest Posts
    Article information

    Author: Twana Towne Ret

    Last Updated:

    Views: 6082

    Rating: 4.3 / 5 (44 voted)

    Reviews: 91% of readers found this page helpful

    Author information

    Name: Twana Towne Ret

    Birthday: 1994-03-19

    Address: Apt. 990 97439 Corwin Motorway, Port Eliseoburgh, NM 99144-2618

    Phone: +5958753152963

    Job: National Specialist

    Hobby: Kayaking, Photography, Skydiving, Embroidery, Leather crafting, Orienteering, Cooking

    Introduction: My name is Twana Towne Ret, I am a famous, talented, joyous, perfect, powerful, inquisitive, lovely person who loves writing and wants to share my knowledge and understanding with you.