How to Fix Your KitchenAid Mixer with the Turn of One Screw (2024)

Home Gear Appliances Mixer

How to Fix Your KitchenAid Mixer with the Turn of One Screw (1)Erica YoungUpdated: Aug. 11, 2020

    How to Fix Your KitchenAid Mixer with the Turn of One Screw (2)Dmitry_Evs/Shutterstock

    Is your mixer starting to show its age? Here's how to get it working like new!

    Have you noticed your mixer just isn’t quite mixing like it used to? Whether you’re whipping up a batch of Grandma’s famous divinity, or serving a decadent layer cake—you need your stand mixer operating at peak performance. (Here’s the model our Test Kitchen likes best.)

    But don’t spend the big bucks on a replacement just yet. Here’s a KitchenAid-approved mixer fixthat’s super easy. In fact, all you need is a flat-head screwdriver.

    Does my mixer need to be adjusted?

    First, determine if your mixer’s problem is the adjustment level. Look out for these telltale signs:

    • After mixing, ingredients are left on the bottom of the bowl
    • The tilt head is not locking in place
    • The white flat beater is chipped on the bottom
    • There are scrape marks in the bottom of the bowl

    If you’ve noticed any of the issues listed above, your mixer needs to be adjusted higher or lower.

    See the KitchenAid mistakes everyone is making.

    Do the dime test

    If your mixer bowl is metal, try this trick. (Note: Do not attempt with a glass or ceramic bowl.)

    Place a dime in the bowl and attach a flat beater. Turn to “stir” or low speed, then observe how the dime moves around the bowl. If the dime does not move, your beater is too high. If the dime moves around continuously, that means your beater is too low. If the dime is traveling slowly around the bowl, moving about a half inch with each pass of the beater, the bowl height is correct.

    Adjust the height of the beater with this quick fix

    Now that you know that your beater height needs to be adjusted, all you need to do is turn one little silver screw. But first, unplug the stand mixer, just to be safe!

    Where is the screw?

    On a tilt head mixeryou will find the screw where the head meets the stand when tilted back. If you have a bowl lift mixer, the screw is located on the inside of the stand.

    How to adjust the screw

    Using a flat-head screwdriver, turn the screw counterclockwise to raise the bowl and clockwise to lower the bowl. Just a slight turn is all you’ll need. Don’t turn the screw more than 90 degrees in either direction. After turning the screw, you may want to use the dime test again to text your clearance level, then repeat the screw adjustment as needed.

    You’re all set! It’s time to treat yourself to a new KitchenAid attachment.

    Foods You Never Thought to Make in a KitchenAid

    1 / 16

    MeatballsMaking meatballs can be tough on your wrists—especially when whipping up a big batch. Save your energy by letting a stand mixer do some of the work. Simply toss the breadcrumbs, eggs, seasonings and any other add-ins from your favorite recipe into the mixing bowl. Use the paddle attachment on a low speed to combine the ingredients. Then, add the meat until mixture is lightly but thoroughly incorporated.

    Get Our Recipe for Great-Grandma's Italian Meatballs

    In the market for a new stand mixer? This is our favorite KitchenAid model.

    Shredded chickenWhether you're shredding chicken for a crowd or a single sandwich, let your stand mixer do all of the work. No forks required. Simply toss cooked, boneless chicken into the mixing bowl, secure the paddle attachment and turn the mixer on a low speed. Voila! In just a few seconds you'll have effortless pulled chicken.

    Get Our Recipe for Shredded Barbecue Chicken over Grits

    Check out the 10 best KitchenAid attachments you can buy.

    GuacamoleGuac lovers, listen up. The days of mixing your favorite chip dip by hand are over. Make guacamole in a stand mixer by placing halved avocados, lime juice and your favorite seasonings in the mixing bowl. Use the paddle attachment on a medium speed to combine. Then, stir in diced tomatoes, onions, jalapeños and any other add-ins you'd like.

    Get Our Recipe for Catherine's Guacamole

    Pizza dough

    No bread machine? No problem. You can still make easy homemade doughs—no kneading required. Just attach a dough hook to your mixer and let it work its magic. Your dough is done when it's smooth and elastic.

    Mashed potatoesMashed potatoes are a holiday favorite, but they can take a toll on your time (and energy!) when mashing by hand. Lighten up your workload by making oh-so-creamy potatoes in your stand mixer. The paddle attachment makes quick work of boiled potatoes, butter, milk and any add-ins you desire. Just mix the spuds on a low or medium speed until you reach the desired consistency.

    Get Our Recipe for Cream Cheese Mashed Potatoes

    Stuffed shells fillingStuffed shells are a comfort food classic, but they can be tedious to assemble. Make the task easier by preparing the filling in your stand mixer. Blend the cheese, seasonings, egg and any other add-ins on a medium speed with the paddle attachment. Once combined, scoop the mixture straight from the bowl into the cooked shells.

    Get Our Recipe for Italian Stuffed Shells

    DipsNo appetizer spread is complete without a good dip, but it takes time to chop and combine all of those ingredients. Use your stand mixer to speed up the process. When making spinach and artichoke dip, for example, mix together the cream cheese, mozzarella, seasonings and other base ingredients until smooth. Then, throw in the spinach, artichokes and other veggies. In just minutes you've made a creamy-yet-chunky dip that's ready to pop in the oven.

    MacaronsMacarons don't have to be intimidating. The secret is to get your egg whites perfectly whipped—and a stand mixer can help you do just that. Let the egg whites reach room temperature, then beat with the whisk attachment until stiff peaks form.

    Get Our Recipe for Hazelnut Macarons

    Ever wonder the difference between macaroons and macarons? Here it is.

    Taste of Home

    Scrambled eggsWe know that scrambled eggs are super easy to make by hand. But when whipping up a big batch for company you'll appreciate your stand mixer's power. Simply crack the eggs into the mixing bowl, secure the whisk attachment, and add your desired amount of milk and seasonings. Blend for a minute or so until the eggs are fluffy and light.

    Get Our Recipe for Fluffy Scrambled Eggs

    Pulled porkTake the mess out of pulled pork by shredding the meat in your stand mixer. Use the paddle attachment and a low speed to tear apart warm meat. Just be sure to cut the roast into medium-sized pieces before attempting to shred it—placing a whole roast in the bowl will overwhelm your machine.

    Get Our Recipe for Root Beer Pulled Pork Sandwiches

    Mom’s Meat LoafMom made the best meat loaf, and now I do too. When I first met my husband, he wasn't a meat loaf guy, but this recipe won him over. —Michelle Beran, Claflin, Kansas

    Get Our Recipe for Best-Ever Meat Loaf

    Cheesecake fillingCheesecake filling can be a real pain to mix by hand—especially if the ingredients are cold. Minimize the muscle by mixing up your filling in a stand mixer. Just blend all of the ingredients until super smooth and pour into your prepared crust.

    Get Our Recipe for Ricotta Cheesecake

    Taste of Home

    ButterAdd extra flavor to your butter with herbs and spices. Just place softened butter in the mixer, add your seasonings, and let the mixer evenly incorporate. If you're feeling extra ambitious, make the butter from scratch by placing heavy cream in the stand mixer. Whip it on high speed until butter starts to form. Drain away any excess liquid, and that's it! You have fresh, homemade butter.

    Get Our Recipe for Lemon Tarragon Butter

    Taste of Home

    KolachkesIt's tough to combine stiff ingredients—like ice cream and butter—by hand. Use your stand mixer to create these sweet Polish treats. Trust us, your arm will thank you.

    Get Our Recipe for Ice Cream Kolachkes

    Lasagna fillingLasagna is a labor of love, but that doesn't mean it has to take hours to make. Speed up the process by preparing at least one of the fillings in your stand mixer. Create the cheese layer by blending together ricotta, eggs, mozzarella and more with a paddle attachment on medium speed.

    Get Our Recipe for Traditional Lasagna

    How to Fix Your KitchenAid Mixer with the Turn of One Screw (17)

    MashmallowsHomemade marshmallows are SO much better than the store-bought kind. And with the help of your stand mixer, they're not too challenging to make. Once you've brought all the ingredients to a boil, pour the liquid into your stand mixer and beat on high until the mixture is thick and has doubled in volume.

    Get Our Recipe for Homemade Holiday Marshmallows

    Up Next: 9 KitchenAid Major Appliances We'd Be Happy to Have in Our Homes

    Originally Published: August 10, 2020

    How to Fix Your KitchenAid Mixer with the Turn of One Screw (19)

    Erica Young

    Erica is a cleaning and home décor expert. She knows exactly how to tidy a filthy kitchen and straighten out a mixed-up pantry! When she's not writing you'll find her organizing a closet, buying more bins she doesn't need or bingeing her latest TV show obsession.

    How to Fix Your KitchenAid Mixer with the Turn of One Screw (2024)

    FAQs

    How to Fix Your KitchenAid Mixer with the Turn of One Screw? ›

    Place a wet, warm towel around the bottom of the bowl for 10 minutes. Re-warm it after the 10 minutes, put it on again, and let it sit for 1 -2 more minutes. This will re-warm the stainless steel, causing it to expand. After this time, try to wiggle and remove the bowl.

    How do you fix a jammed KitchenAid mixer? ›

    Place a wet, warm towel around the bottom of the bowl for 10 minutes. Re-warm it after the 10 minutes, put it on again, and let it sit for 1 -2 more minutes. This will re-warm the stainless steel, causing it to expand. After this time, try to wiggle and remove the bowl.

    How do I raise the head on my KitchenAid mixer? ›

    Turn the screw very slightly counterclockwise (left) to raise the beater, or clockwise (right) to lower it.

    Do KitchenAid mixers have a lifetime warranty? ›

    Length of Warranty: One Year Full Warranty from date of purchase. 1-800-541-6390. OR The replacement parts and repair labor costs to correct defects in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Center.

    What can I do with a broken KitchenAid mixer? ›

    Where can I get my stand mixer repaired?
    1. Call 1-855-845-9684 to order a "shipping kit," which will come to your home.
    2. Simply place your mixer into the box (including the bowl and flat beater so they can thoroughly test and adjust your mixer).
    3. Drop it off at a FedEx location.
    Mar 12, 2024

    Does KitchenAid have a lifetime warranty? ›

    If you need warranty service, contact the KitchenAid Customer eXperience Center at 1-800-541-6390 in the USA or 1-800-807-6777 in Canada. Lifetime limited warranty applies to U.S.A. and Canada only. For warranty information as it applies to other countries, visit international.KitchenAid.com.

    How do you free a stuck hinge pin? ›

    Nudge the pin loose and remove it.

    Tapping the hinge with a hammer can loosen it up. If this isn't working, try ramming the pin up with a few more taps from the hammer. For the sake of stability, take off the bottom hinge first, followed by the top. If the door is triple-hinged, take out the middle one first.

    How do you fix a hinge pin? ›

    Gently hammer the pin upward. It might take some time to get the pin to move, but it should eventually release with enough hammering unless it is rusted in place. If your hinge pin is rusted and stuck in the hinge barrel, you'll need a penetrating oil to break down the corrosion.

    How long do KitchenAid mixers last? ›

    On average, KitchenAid stand mixers carry a lifespan of 10 to 15 years. That said, their longevity largely depends on how frequently they're used and how well they're maintained. “A KitchenAid mixer should last you many years, as long as you're not abusing it,” says David.

    How do I reset my KitchenAid mixer? ›

    If the stand mixer stops due to overload, slide the speed control lever to OFF. After a few minutes, the stand mixer will automatically reset. Slide the Speed Control Lever to the desired speed and continue mixing. If the stand mixer does not restart, see the “Troubleshooting Problems” section.

    Why is my KitchenAid not turning on? ›

    Check for any visible damage or loose connections on the controls. If you find issues, consider replacing the damaged parts. Some KitchenAid mixers have a fuse that will blow in case of electrical overload. Check the circuit breaker or fuse and reset or replace it if necessary.

    Why is my KitchenAid tilt head not locking? ›

    If the beater is too high on a tilt head mixer, it can prevent the head from locking into place. The locking mechanism does not necessarily need to move to the end to lock the head into place. If the head lifts, lowering the beater will almost always resolve the locking mechanism issue.

    Do KitchenAid mixers have lifetime warranty? ›

    Length of Warranty: One Year Full Warranty from date of purchase. KitchenAid Will Pay for Your Choice of: Hassle-Free Replacement of your Stand Mixer. See the next page for details on how to arrange for service, or call the Customer eXperience Center toll-free at 1-800-541-6390.

    Why is my KitchenAid rattling? ›

    Old or Insufficient Gear Grease

    After years of use, the mixer may be lacking the required grease to help the gears spin smoothly. This may cause it to rattle or make noise.

    Top Articles
    Latest Posts
    Article information

    Author: Kieth Sipes

    Last Updated:

    Views: 5610

    Rating: 4.7 / 5 (67 voted)

    Reviews: 90% of readers found this page helpful

    Author information

    Name: Kieth Sipes

    Birthday: 2001-04-14

    Address: Suite 492 62479 Champlin Loop, South Catrice, MS 57271

    Phone: +9663362133320

    Job: District Sales Analyst

    Hobby: Digital arts, Dance, Ghost hunting, Worldbuilding, Kayaking, Table tennis, 3D printing

    Introduction: My name is Kieth Sipes, I am a zany, rich, courageous, powerful, faithful, jolly, excited person who loves writing and wants to share my knowledge and understanding with you.