Prerequisites for software updates - Configuration Manager (2024)

Applies to: Configuration Manager (current branch)

This article lists the prerequisites for software updates in Configuration Manager. For each of the prerequisites, the external dependencies and internal dependencies are listed in separate tables.

Software update dependencies that are external to Configuration Manager

The following sections list the external dependencies for software updates.

Internet Information Services

Internet Information Services (IIS) must be installed on the site system servers to run the software update point, the management point, and the distribution point. For more information, see Prerequisites for site system roles.

Windows Server Update Services

Windows Server Update Services (WSUS) is needed for software updates synchronization and for the software updates applicability scan on clients. The WSUS server must be installed before you create the software update point role. The following versions of WSUS are supported for a software update point:

• WSUS 10.0.14393 (role in Windows Server 2016) (2023-02 Cumulative Update, or a later cumulative update)
• WSUS 10.0.17763 (role in Windows Server 2019) (Requires Configuration Manager 1810 or later) (2023-02 Cumulative Update, or a later cumulative update)
• WSUS 10.0.20348 (role in Windows Server 2022) (2023-02 Cumulative Update, or a later cumulative update)
• WSUS 6.2 and 6.3 (role in Windows Server 2012 and Windows Server 2012 R2) (2023-03 Cumulative Update, or a later cumulative update)
  • KB 3095113 and KB 3159706 (or an equivalent update) are needed for WSUS 6.2 and 6.3 if you deploy Windows upgrades.

WSUS Administration Console

The WSUS Administration Console is required on the Configuration Manager site server when the software update point is on a remote site system server and WSUS isn't already installed on the site server.

Windows Update Agent

The Windows Update Agent (WUA) client is required on clients so that they can connect to the WSUS server. WUA retrieves the list of software updates that must be scanned for compliance.

When you install Configuration Manager, the latest version of WUA is downloaded. Then, when you install the Configuration Manager client, WUA is upgraded if necessary. If the installation fails, you must use a different method to upgrade WUA.

Software update dependencies that are internal to Configuration Manager

The following sections list the internal dependencies for software updates in Configuration Manager.

Management points

Management points transfer information between client computers and the Configuration Manager site. The management points are required for software updates.

Software update points

You must install a software update point on the WSUS server to deploy software updates in Configuration Manager. For more information, see Install and configure a software update point.

Distribution points

Distribution points are required to store the content for software updates. For more information about how to install distribution points and manage content, see Manage content and content infrastructure.

Client settings for software updates

Software updates are enabled for clients by default. There are other available settings that control how and when clients assess compliance for the software updates and control how the software updates are installed.

For more information, see the following articles:

• Client settings for software updates

• Software updates client settings

Reporting services points

The reporting services point site system role can display reports for software updates. This role is optional but recommended. For more information about how to create a reporting services point, see Configuring reporting.

Which updates are required on WSUS 6.2 and 6.3?

Two updates are required for syncing Upgrades classification in WSUS 6.2 and 6.3. Occasionally, you might see an error downloading or deploying upgrades if they synchronized before KB3095113 and KB3159706 were installed. Information about possible issues is in the next section.

• You must install KB 3095113, released in October 2015, on your software update points and site servers before you synchronize the Upgrades classification.
  • This update enables the Upgrades classification.
• To service Windows 10 or later clients, you must install and configure KB 3159706. KB 3159706 was released in May 2016.
  • This update enables WSUS to natively decrypt the files used for upgrading Windows 10 version 1607 and later.

Download of Windows upgrades fails with "Error: Invalid certificate signature" or 0xc1800118

The updates and issue described in this section only apply to WSUS running on Windows Server 2012 or Windows Server 2012 R2 machines (WSUS 6.2 and 6.3). Typically, you'll only see the issues described in this section if you installed WSUS before July 2017 and you've recently enabled the Upgrades classification. However, it's possible to see these issues in other situations too.

Historical information about KB 3095113

KB 3095113 was released as a hotfix in October 2015 to add support for Windows 10 upgrades to WSUS. The update enables WSUS to synchronize and distribute updates in the Upgrades classification for Windows.

If you synchronize any upgrades without having first installed KB 3095113, you populate the WSUS database (SUSDB) with unusable data. That data must be cleared before the upgrades can be properly deployed. Windows upgrades in this state can't be downloaded by using the Download Software Updates Wizard.

Errors that resemble the following appear on the Completion page of the Download Software Updates Wizard:

Error: Upgrade to Windows 10 Pro, version 1511, 10586Failed to download content id {content_id}. Error: Invalid certificate signature

Additionally, errors resembling the following are logged in the PatchDownloader.log file:

Download http://wsus.ds.b1.download.windowsupdate.com/d/upgr/2015/12/10586.0.151029-1700.th2_release_...esd...Authentication of file C:\Users\{username}\AppData\Local\Temp\2\{temporary_filename}.tmp failed, error 0x800b0004ERROR: DownloadContentFiles() failed with hr=0x80073633# This log is truncated for readability.

Historically, when these errors occurred, they would be resolved by doing a modified version of the resolution steps for WSUS. Because these steps are similar to the resolution for not doing the manual steps required after KB 3159706 installation, we've combined both sets of steps into a single resolution in the section below:

• To recover from synchronizing the upgrades before you install KB 3095113 or KB 3159706.

Historical information about KB 3159706

KB 3148812 was initially released in April 2016 to enable WSUS to natively decrypt the .esd files used for upgrading Windows 10 packages. KB 3148812 caused problems for some customers and was replaced with KB 3159706. KB 3159706 needs to be installed on all your software update points and site servers before you can service Windows 10 Version 1607 and later devices. However, problems can arise if you don't realize the KB requires the following manual steps after installation:

1. From an elevated command prompt run "C:\Program Files\Update Services\Tools\wsusutil.exe" postinstall /servicing.
2. Restart the WSUS service on all of the WSUS servers.

If you don't realize that KB 3159706 had manual steps after installation, or you synchronized in the upgrades before installing KB 3159706, you would run into issues connecting to the WSUS console and deploying the upgrade respectively. When a client downloaded the upgrade file, it would get a 0xC1800118 error code.

Because the resolution steps are similar to the resolution for synchronizing upgrades before KB 3095113 installation, we've combined both sets of steps into a single resolution in the next section.

To recover from synchronizing the upgrades before you install KB 3095113 or KB 3159706

Follow the steps below to resolve both the 0xc1800118 error and "Error: Invalid certificate signature":

1. Disable the Upgrades classification in both WSUS and Configuration Manager. You don't want a synchronization to occur until you're directed to by these instructions.
   • Uncheck the Upgrades classification in the software update point component properties on the top-level site.
     • For more information, see Configure classifications and products.
   • Uncheck the Upgrades classification from WSUS under Products and Classifications on the Options page, or use the PowerShell ISE running as administrator.

     Get-WsusClassification | Where-Object -FilterScript {$_.Classification.Title -Eq "Upgrades"} | Set-WsusClassification -Disable

     • If you share the WSUS database between multiple WSUS servers, you only need to uncheck Upgrades once for each database.
2. On each WSUS server, from an elevated command prompt run: "C:\Program Files\Update Services\Tools\wsusutil.exe" postinstall /servicing. Then, restart the WSUS service on all of the WSUS servers.
   • WSUS places the database into single user mode before it checks to see if servicing is needed. The servicing either runs or doesn't run based on the results of the check. Then, the database is put back into multi-user mode.
   • If you share the WSUS database between multiple WSUS servers, you only need to do this servicing once for each database.
3. Delete all of the Windows 10 upgrades from each WSUS database using the PowerShell ISE running as administrator.

   [reflection.assembly]::LoadWithPartialName("Microsoft.UpdateServices.Administration")$wsus = [Microsoft.UpdateServices.Administration.AdminProxy]::GetUpdateServer();$wsus.GetUpdates() | Where {$_.UpdateClassificationTitle -eq 'Upgrades' -and $_.Title -match 'Windows 10'} `| ForEach-Object {$wsus.DeleteUpdate($_.Id.UpdateId.ToString()); Write-Host $_.Title removed}

4. Delete files from the tbFile table from each of the WSUS databases used by your software update points. On the WSUS database, run the following commands from SQL Server Management Studio:

   declare @NotNeededFiles table (FileDigest binary(20) UNIQUE)insert into @NotNeededFiles(FileDigest) (select FileDigest from tbFile where FileName like '%.esd%' except select FileDigest from tbFileForRevision)delete from tbFileOnServer where FileDigest in (select FileDigest from @NotNeededFiles)delete from tbFile where FileDigest in (select FileDigest from @NotNeededFiles)

5. Start the software updates synchronization on your top-level site in Configuration Manager and wait for it to complete. A full synchronization occurs because we made a change to the classifications Configuration Manager when we removed Upgrades. (For more information, see Synchronize software updates.
6. Select the Upgrades classification in the software update point component properties. Then, start another software updates synchronization to bring the Upgrades back into WSUS and Configuration Manager. You don't have to enable the Upgrades classification in WSUS since Configuration Manager will do it for you.
7. If your clients received the 0xC1800118 error code when downloading an upgrade, you'll need to delete the data store used by the Windows Update Agent. You may also have to delete the hidden ~BT folder on the device. The next time the client scans, it will be a full scan against the WSUS server rather than a delta. You can use a PowerShell script that's similar to the following sample script:

   stop-service wuauservremove-item -path c:\windows\softwaredistribution\datastore -recurse -force# If the device has a hidden ~BT folder on the c drive, delete it too by uncommenting the next line.# remove-item -path c:\~BT -recurse -forcestart-service wuauserv

Next steps

Prepare for software updates management