Template (2024)

The electromagnetic (EM) spectrum is the range of all types of EM radiation. Radiation is energy that travels and spreads out as it goes – the visible light that comes from a lamp in your house and the radio waves that come from a radio station are two types of electromagnetic radiation. The other types of EM radiation that make up the electromagnetic spectrum are microwaves, infrared light, ultraviolet light, X-rays and gamma-rays.

You know more about the electromagnetic spectrum than you may think. The image below shows where you might encounter each portion of the EM spectrum in your day-to-day life.

Template (1)

The electromagnetic spectrum from lowest energy/longest wavelength (at the top) to highest energy/shortest wavelength (at the bottom). (Credit: NASA's Imagine the Universe)

Radio: Your radio captures radio waves emitted by radio stations, bringing your favorite tunes. Radio waves are also emitted by stars and gases in space.

Microwave: Microwave radiation will cook your popcorn in just a few minutes, but is also used by astronomers to learn about the structure of nearby galaxies.

Infrared: Night vision goggles pick up the infrared light emitted by our skin and objects with heat. In space, infrared light helps us map the dust between stars.

Visible: Our eyes detect visible light. Fireflies, light bulbs, and stars all emit visible light.

Ultraviolet: Ultraviolet radiation is emitted by the Sun and are the reason skin tans and burns. "Hot" objects in space emit UV radiation as well.

X-ray: A dentist uses X-rays to image your teeth, and airport security uses them to see through your bag. Hot gases in the Universe also emit X-rays.

Gamma ray: Doctors use gamma-ray imaging to see inside your body. The biggest gamma-ray generator of all is the Universe.


Is a radio wave the same as a gamma ray?

Are radio waves completely different physical objects than gamma-rays? They are produced in different processes and are detected in different ways, but they are not fundamentally different. Radio waves, gamma-rays, visible light, and all the other parts of the electromagnetic spectrum are electromagnetic radiation.

Electromagnetic radiation can be described in terms of a stream of mass-less particles, called photons, each traveling in a wave-like pattern at the speed of light. Each photon contains a certain amount of energy. The different types of radiation are defined by the the amount of energy found in the photons. Radio waves have photons with low energies, microwave photons have a little more energy than radio waves, infrared photons have still more, then visible, ultraviolet, X-rays, and, the most energetic of all, gamma-rays.

Measuring electromagnetic radiation

Electromagnetic radiation can be expressed in terms of energy, wavelength, or frequency. Frequency is measured in cycles per second, or Hertz. Wavelength is measured in meters. Energy is measured in electron volts. Each of these three quantities for describing EM radiation are related to each other in a precise mathematical way. But why have three ways of describing things, each with a different set of physical units?

Template (2)

Comparison of wavelength, frequency and energy for the electromagnetic spectrum. (Credit: NASA's Imagine the Universe)

The short answer is that scientists don't like to use numbers any bigger or smaller than they have to. It is much easier to say or write "two kilometers" than "two thousand meters." Generally, scientists use whatever units are easiest for the type of EM radiation they work with.

Astronomers who study radio waves tend to use wavelengths or frequencies. Most of the radio part of the EM spectrum falls in the range from about 1 cm to 1 km, which is 30 gigahertz (GHz) to 300 kilohertz (kHz) in frequencies. The radio is a very broad part of the EM spectrum.

Infrared and optical astronomers generally use wavelength. Infrared astronomers use microns (millionths of a meter) for wavelengths, so their part of the EM spectrum falls in the range of 1 to 100 microns. Optical astronomers use both angstroms (0.00000001 cm, or 10-8 cm) and nanometers (0.0000001 cm, or 10-7 cm). Using nanometers, violet, blue, green, yellow, orange, and red light have wavelengths between 400 and 700 nanometers. (This range is just a tiny part of the entire EM spectrum, so the light our eyes can see is just a little fraction of all the EM radiation around us.)

The wavelengths of ultraviolet, X-ray, and gamma-ray regions of the EM spectrum are very small. Instead of using wavelengths, astronomers that study these portions of the EM spectrum usually refer to these photons by their energies, measured in electron volts (eV). Ultraviolet radiation falls in the range from a few electron volts to about 100 eV. X-ray photons have energies in the range 100 eV to 100,000 eV (or 100 keV). Gamma-rays then are all the photons with energies greater than 100 keV.

Template (3)Show me a chart of the wavelength, frequency, and energy regimesof the spectrum

Why do we put telescopes in orbit?

Template (4)

The Earth's atmosphere stops most types of electromagnetic radiation from space from reaching Earth's surface. This illustration shows how far into the atmosphere different parts of the EM spectrum can go before being absorbed. Only portions of radio and visible light reach the surface. (Credit: STScI/JHU/NASA)

Most electromagnetic radiation from space is unable to reach the surface of the Earth. Radio frequencies, visible light and some ultraviolet light makes it to sea level. Astronomers can observe some infrared wavelengths by putting telescopes on mountain tops. Balloon experiments can reach 35 km above the surface and can operate for months. Rocket flights can take instruments all the way above the Earth's atmosphere, but only for a few minutes before they fall back to Earth.

For long-term observations, however, it is best to have your detector on an orbiting satellite and get above it all!

Updated: March 2013

Template (2024)

FAQs

What is a template in writing? ›

A writing template is just the roadmap that helps an individual or a team along in the writing process. These templates will contain the basic outline of a piece, and typically include helpful notes on the audience, objective, and structure of the text.

What is a document template? ›

A template is a document type that creates a copy of itself when you open it. For example, a business plan is a common document that is written in Word. Instead of creating the structure of the business plan from scratch, you can use a template with predefined page layout, fonts, margins, and styles.

Is it template or template? ›

Spell it "template." "Templet" is a very rare spelling. I am surprised to find that it really is in the American Heritage Dictionary as an "alternative to 'template.

How to use Word template? ›

All you have to do is open Microsoft Word, select “File” and “New.” Choose from a variety of categories and find the perfect template. Once selected, just add your text and images. These templates are versatile. Personal and professional uses are both possible.

What is the example of template? ›

They can be a physical object, such as a paper template that is used to cut out pieces of fabric, but they can also be a digital template, such as a file that opens in a design program like Photoshop.

What is a simple definition of template? ›

template. noun. tem·​plate ˈtem-plət. 1. : a gauge, pattern, or mold (as a thin plate or board) used as a guide to the form of a piece being made.

What is the difference between a document and a template? ›

Simply put, a Word template is a blueprint. That's to say, it forms the base from which you create Word documents. As such, a Word template includes only the styles, layout, formatting and content needed for all documents that will be created from it.

What is the difference between a template and a document? ›

Templates in PandaDoc are used for generic content that you intend on using multiple times, while documents are used for specific information. In order to send a document, you must first create it from an existing template. Learn more about templates and when to use them here.

What is the difference between a form and a template? ›

Templates are the primary data-gathering document framework created by a member of your organization. Forms are unique instances of these documents created and completed by Form Users.

What are the three types of templates? ›

Technical overview. There are three kinds of templates: function templates, class templates and, since C++14, variable templates. Since C++11, templates may be either variadic or non-variadic; in earlier versions of C++ they are always non-variadic.

What is another Word for template? ›

a model or standard for making comparisons. synonyms: guide, templet.

Why is it called a template? ›

Etymology. Alteration of templet, probably from French templet, diminutive of temple (“a weaver's stretcher”), variant of tempe, from Latin tempora (“temple”). Alteration of second syllable due to analogy with plate.

What does a template include? ›

Templates are files that help you design interesting, compelling, and professional-looking documents. They contain content and design elements that you can use as a starting point when creating a document. All the formatting is complete; you add what you want to them. Examples are resumes, invitations, and newsletters.

Top Articles
Latest Posts
Article information

Author: Tyson Zemlak

Last Updated:

Views: 5305

Rating: 4.2 / 5 (43 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Tyson Zemlak

Birthday: 1992-03-17

Address: Apt. 662 96191 Quigley Dam, Kubview, MA 42013

Phone: +441678032891

Job: Community-Services Orchestrator

Hobby: Coffee roasting, Calligraphy, Metalworking, Fashion, Vehicle restoration, Shopping, Photography

Introduction: My name is Tyson Zemlak, I am a excited, light, sparkling, super, open, fair, magnificent person who loves writing and wants to share my knowledge and understanding with you.