How Do You Exit Vim? A Newbie Question Turned Tech Meme (2024)

How Do You Exit Vim? A Newbie Question Turned Tech Meme (1)A decade ago, a programmer asked on Stack Overflow how to exit the decades-old Vim open source text editor, and the question has since become a cultural touchstone of the modern development experience.

Maybe it’s proof that the 50-year-old text editor has retained its popularity — that it’s now part of the shared collective experience of the developer community. (Vim is a 1991 clone of Bill Joy’s vi editor created in 1976, to serve as the visual mode for a line editor called ex. It was included in the initial Berkeley Software Distribution [BSD] Unix, released in 1978 and has been in the Unix/Linux developer’s toolbox ever since.)

But it also speaks to a larger truth, a fond and knowing acknowledgment that mastering Vim requires taking the time to educate yourself on its shortcuts and functionalities. Maybe there’s some secret pride in the fact that as powerful as Vim may be — there is still a learning curve. Getting trapped in Vim in a decades-old text editor remains a common if not universal experience for struggling first-time users.

So here’s a quick story: Last weekend I had a class of 7 students learning JavaScript. I wanted to open a file in the terminal to show them what’s inside and I did my usual:

vi filename.txt

I’ve spent the next 15 minutes exiting vim on 7 different machines.

— Tomasz Łakomy 🌩 cloudash.dev 🇺🇦 (@tlakomy) August 27, 2018

Basically, it’s an essential function that can’t always be executed in an intuitive way. When you’re typing away in Vim, it won’t accept commands like “q” for quit until you first hit the escape key — and even then, commands like “quit” are preceded by a colon.

A wise Linux greybeard once pointed out to us that Vim is no different than Microsoft Word in that both have two modes. One is a command mode to save files, add formatting, quit the program itself, and such. And there is the edit mode, where you write your code, book proposals, etc. The trick is to learn how to effortlessly toggle between the two.

Yet, so many novice users have gotten tripped on exiting Vim, that the instructions are now displayed prominently on its welcome screen when the software is launched — even before the Help command.

How Do You Exit Vim? A Newbie Question Turned Tech Meme (2)

And typing Ctrl-C twice in Vim now pulls up a hint at the bottom of your screen.

How Do You Exit Vim? A Newbie Question Turned Tech Meme (3)

But over the years, the difficulty became the affectionate target of some gentle geek satire. Currently, GitHub even shows 77 contributors to a repository titled “How to Exit Vim.” For example, one suggests the best way is to edit your shell’s alias file so that “vim” gets mapped to a command launching vim processes that time out and end after exactly 600 seconds. (“Make sure to save regularly.”)

How Do You Exit Vim? A Newbie Question Turned Tech Meme (4)

A 2019 YouTube video shows an even more convoluted solution. It involves suspending the foreground Vim process (using Ctrl-Z), and then pulling up a list of all active processes (using ps ax), grepping for all the processes containing the string vim — while filtering out that grep process (which also contains the string vim) — and then using Awk to format the results so an xargs comand can kill the Vim-running process.

ps ax | grep vim | grep -v grep | awk '{print $1}' | xargs -n1 kill -9

Commenters on the video responded with exaggerated gratitude, with one claiming they’d been trapped in Vim for an entire week, and another adding “Until now I used to press the power button to exit vim”

Preferred way of exiting #vim?

— Josh Boyd (@joshboyd) September 20, 2018

Recognizing Ourselves

There’s also a joyful thrill of recognition when geeks stumble across reminders of just how common the problem may be.

Ten years ago someone asked “How do I exit Vim?” on Stack Overflow — and in the decade since the question has been upvoted 4,786 times (and bookmarked by Stack Overflow users over a thousand times). Answers to the question have been lovingly maintained and curated over the last 10 years. And while it took almost five years to reach 1 million views, in the five years since it’s received another 1.7 million views — for a total of 2.7 million.

Last week Reddit users couldn’t resist celebrating the 10th anniversary of the question. After the URL to the original question was posted on Reddit’s programming forum, it drew over 5,000 upvotes — and another 660 comments.

Yet mixed in with the comments were some genuine appreciation for Stack Overflow’s answer. “That answer is what in fact made me properly consider Vim ten years ago,” remembered one commenter. “Ten years later, still one of the best accidental software decisions in my CS journey.”

And another commenter felt Vim didn’t deserve its reputation for a steep learning curve, since “it’s sometimes inflicted on innocent users who were just trying to carry out a git commit. I’d bet that that makes up at least half of the views for that question.”

How Do You Exit Vim? A Newbie Question Turned Tech Meme (5)

The question received a special acknowledgment in May of 2017 on Stack Overflow’s blog — when it achieved a special milestone. “You’re not alone…” wrote Stack Overflow data scientist David Robinson. In the five years since this question was asked, there have been over a million other developers who got stuck in Vim and couldn’t escape without a bit of help.” That actually accounted for one out of every 20,000 visits to Stack Overflow’s questions.

“That means during peak traffic hours on weekdays, there are about 80 people per hour that need help getting out of Vim.”

“If you win you get to exit vim”
“What’s the game?”
“Exiting vim” pic.twitter.com/vapdZlhUNK

— SwiftOnSecurity (@SwiftOnSecurity) April 29, 2020

The Demographics of Getting Stuck in Vim

Robinson also couldn’t help acknowledging that the question itself has now attained rarefied status as a techie meme.

I’ve given up exiting Vim. I just buy a new laptop each time.

— Paul J Stales 🧑🏻‍💻 (@pauljstales) August 3, 2022

But the post also delved into the demographics of those million views (“in honor of this milestone”). Interestingly, in 2017 the country where visits to question represented the highest percentage of all Vim-related question visits was Ukraine (followed by Turkey, Indonesia, Pakistan, Vietnam — and then Russia). The United States ranked #21 (behind Australia, and just above India).

Robinson also calculated the top visitors by which area of Stack Overflow they visited most frequently (based on the area’s tags), hoping to break down Vim exiters by their “main programming technology”. The results? “The developers who are most likely to get stuck in Vim are frontend web developers: those who primarily visit tags like JQuery, CSS, and AngularJS. They’re followed by Microsoft developers (C# and SQL Server) and mobile (Android and iOS).”

I’ve been using Vim for about 2 years now, mostly because I can’t figure out how to exit it.

— I Am Devloper (@iamdevloper) February 17, 2014

The post speculates Microsoft developers usually work with a full-fledged IDE, and may not be as familiar with simple text editors like Vim. In contrast, the developers least likely to get stuck in Vim were those whose main programming language was C, C++, Python or Ruby — languages which Stack Overflow’s data scientist believes are often written with plain text editors.

But the demographics don’t fully dispel the idea that it’s a pretty common experience to get trapped in Vim. And the jokes keep on coming — bearing testimony to that unique yet potentially confounding experience that can await first-time users of Vim.

how do i never see another exiting Vim “joke”?

— chantastic is away 🥾 (@chantastic) April 24, 2021

Amazon’s Kindle Store features a humorous 23-page ebook on the subject — which the author has broken up into 19 chapters. (“Finally, a way to unlock the mysteries of quitting Vim without leaving a trail of destruction behind you.”) Its top-rated review calls it “A Masterful Feat of Concision,” and awarded the 23-page ebook a full five stars, in a possibly-sarcastic review.) “This book is an exhaustive treatise on one of Vim’s most common and least understood features, but it reads quickly and effortlessly. It will stand the test of time.”

Another reviewer tucked mock enthusiasm into their review’s title. “Exited Vim first try. Would buy again.”

And another joked, “I can’t wait for the second edition on how to access and use vim help.”

But alas, one reviewer awarded only four stars. “I would give this book 5 stars but I can’t figure out how to close it.”

#Vexit pic.twitter.com/VNd9XsSiTd

— DEV Community 👩‍💻👨‍💻 (@ThePracticalDev) June 28, 2016

How Do You Exit Vim? A Newbie Question Turned Tech Meme (2024)

FAQs

How do I get out of Vim mode? ›

TL;DR – How to Exit Vim

If you didn't make any changes, type :q and press Enter / return. If you made some changes and would like to keep them, type :wq and press Enter / return.

What is the command to quit Vim? ›

The procedure is as follows to quit vim/vi text editor:
  1. First, you need to switch to command mode. ...
  2. :q to quit.
  3. :q! to quit without saving data/file.
  4. :x save and quit.
  5. :qa to quit all open files.
  6. Please note that whenever you type : , a vim or vi : will appear at the bottom of the screen.
13 Aug 2022

How do I exit Vim in Visual Studio? ›

Step 2: Quit vim using commands
  1. :q (yes, the colon is included in the command) – This will quit the editor. It may prompt you if you are trying to exit Vim and there are unsaved changes.
  2. :q! – Quit Vim without saving the data file (all unsaved changes are discarded).
  3. :wq – Save the file and exit Vim.

How do I exit Vim without changing? ›

To exit Vim without saving changes:
  1. Switch to command mode by pressing the Esc key.
  2. Press : (colon) to open the prompt bar in the bottom left corner of the window.
  3. Type q! after the colon and hit Enter to exit without saving the changes.
22 Sept 2022

How do I go back to normal mode in Vim? ›

Use Alt/Meta In a Terminal

If you use Vim in a terminal, simply press alt/meta+normal_mode_key. Most terminals send an escape character followed by the normal_mode_key that you pressed, removing the need to press escape yourself.

How do I go to normal mode in Vim? ›

Normal Mode

By default, Vim starts in “normal” mode. Normal mode can be accessed from other modes by pressing Esc or <C-[> .

How do I exit Vim Reddit? ›

When you open vim you can move within the text and type commands preceded by : To write text you must enter in the insert mode by pressing the i key (in this case without the : ), then esc returns you to the default mode, from which you can quit ( :q ), save and quit ( :wq ) or quit without saving ( :q! ).

How do I get out of Vi after editing? ›

In Vi, write means save, and quit means exit. If you've made mistakes along the way while editing and want to back out (abandon) all non-saved changes, enter Command mode by pressing Esc and typing :q! This command quits without saving any changes and exits Vi.

What does Ctrl R do in Vim? ›

Use CTRL-R " when entering a command in command mode to paste the current paste buffer contents. Substitute " for a buffer name, % for current filename, / for last search term, + for the X clipboard or a host of other substitutions. CTRL-R also works in insert mode, no more skipping back to normal mode to paste!

What does Ctrl Q do in Vim? ›

Download this Cheatsheet
Shortcut KeysFunction
Ctrl + W, then QDelete the currently selected buffer.
Save and Quit
:QQuits Vim but fails when file has been changed.
:WSave the file.
155 more rows
26 Jul 2022

What is Ctrl G in Vim? ›

{not in Vi} *g_CTRL-G* *word-count* *byte-count* g CTRL-G Prints the current position of the cursor in five ways: Column, Line, Word, Character and Byte. If the number of Characters and Bytes is the same then the Character position is omitted.

Why is it impossible to exit Vim? ›

You cannot exit Vim when you are in input mode. You need to be sure that you are in the Command mode. To do that, simply press the Esc key.

Can I exit Vi? ›

First, press the Esc key a few times. This will ensure vi is out of Insert mode and in Command mode. Second, type :q! and press Enter. This tells vi to quit without saving any changes.

What does Ctrl G do in vi editor? ›

Ctrl+G in most text editors and IDEs

In most text editors and IDEs, Ctrl + G shortcut is used to go to a specific line in the file.

What is escape mode in vi editor? ›

The vi always starts in command mode. To enter text, you must be in insert mode. To come in insert mode you simply type i. To get out of insert mode, press the Esc key, which will put you back into command mode. Last Line Mode(Escape Mode): Line Mode is invoked by typing a colon [:], while vi is in Command Mode.

How do you exit edit? ›

While you are editing text, a lot of keyboard shortcuts are not available. To exit Text Edit mode, press Ctrl Enter (Mac: Command Return) and then perform any keyboard shortcut you like.

› questions › how-to-exit-vim-and-... ›

:q is not good because you need to save the file manually before quit. If you use main window only(no tabs), :wq or equivalent ZZ is better. They will save and ...
53 votes, 208 comments. I just want to know how Vim user's escape to NORMAL mode. Do you guys mode your hand towards the escape key, or do you guys…
281 votes, 53 comments. 62K subscribers in the emacs community. The extensible, customizable, self-documenting real-time display editor.

What is the command to quit and save in Vim? ›

To save a file in Vim / vi, press Esc key, type :w and hit Enter key. One can save a file and quit vim / Vi by pressing Esc key, type :x and hit Enter key.

What is the Quit command in Linux? ›

Access selection menu: a: Admin CLI s: Shell q: Quit Select access or quit [admin] : Type q or quit to exit.

How do I exit a file after Vi? ›

Press Esc to enter Command mode, and then type :wq to write and quit the file. The other, quicker option is to use the keyboard shortcut ZZ to write and quit. In Vi, write means save, and quit means exit.

Should a beginner use Vim? ›

Even though Vim is my favorite editor, I'll be very blunt: you might not want to. If you're never going to do any system administration or heavy editing of text, and if you don't want to invest any time in learning the capabilities that Vim has, then learning Vim might not be the best use of your time.

How does Vim command work? ›

vim has two "modes": COMMAND mode and INSERT mode. In COMMAND mode, you execute commands (like undo, redo, find and replace, quit, etc.). In INSERT mode, you type text. There is a third mode, VISUAL mode, that is used to highlight and edit text in bulk.

Why is Vim command used? ›

A visual editor allows users to write and manipulate text in a file in a Unix-based operating system. An improved version of Vi is called the Vim editor.

What does Ctrl k do in Linux? ›

Ctrl+K – removes all text from the cursor to the end of the line. Ctrl+X and then Backspace – removes all the text from the cursor to the beginning of the line.

What is quit () used for? ›

quit() : The quit() method quits the driver, closing every associated window. driver. close() : The close() method closes the currently focused window, quitting the driver if the current window is the only open window. If there are no windows open, it will error out.

What is exit () system call? ›

On many computer operating systems, a computer process terminates its execution by making an exit system call. More generally, an exit in a multithreading environment means that a thread of execution has stopped running. For resource management, the operating system reclaims resources (memory, files, etc.)

Top Articles
Latest Posts
Article information

Author: Greg Kuvalis

Last Updated:

Views: 6051

Rating: 4.4 / 5 (75 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Greg Kuvalis

Birthday: 1996-12-20

Address: 53157 Trantow Inlet, Townemouth, FL 92564-0267

Phone: +68218650356656

Job: IT Representative

Hobby: Knitting, Amateur radio, Skiing, Running, Mountain biking, Slacklining, Electronics

Introduction: My name is Greg Kuvalis, I am a witty, spotless, beautiful, charming, delightful, thankful, beautiful person who loves writing and wants to share my knowledge and understanding with you.